It'll also stay at a load if you've done anything like mess with the OC Genie/automatic overclock, changed vcore in bios, tampered with bios settings on a multitude of ways like disable speed step or c-states etc. Moving the mouse is a load, so the cpu will not idle if you keep moving the mouse to keep the Screensaver disabled or the monitor active. OC will change that, as will locking the cores at max boost of 4.9GHz, both of which drastically increase power usage, and therefore heat output. For the 9700k, that's 1 core at 4.9GHz, 2 cores at 4.8GHz, 3-4 cores at 4.7GHz and 5-8 cores at 4.6GHz. As depicted in this screen shot, there are many gain modes: Sensitivity. String List CpuFrequenz: Spanish-VE Spanish-VE Venezuela TranslatorNameRicardo A. SpeedFan can even change the FSB on some hardware (but this should be considered a bonus feature). Then run SDRSharp.exe and select the AIRSPY front-end: Then next step is the gain configuration. SpeedFan is a program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips. It's usually pretty pathetic.Īt loads over 30% (which is basically anything you start up) the cpu goes to best performance mode and will turbo/boost according to temps and power limits. First, go to the download page and get a copy. Idle, base, boost.Īt idle, the cpu backs off on core speeds and voltage use, so temps are set according to ambient case temps and efficiency of cooler.Īt minimal loads, under 30%, you get base speeds, which is the factory set speed to determine TDP.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |